Welcome to A-TECH NDT INSPECTION SERVICES

A-TECH NDT INSPECTION SERVICES is a Cambodia owned independent inspection company operating within the Kingdom of Cambodia. We currently have the capabilities to provide a full scope of NDT services through our existing techniques and in collaboration with our joint venture partners with the aim to bring the full scope of equipment and methods into Cambodia on a permanent basis. We have a designated team of Engineers & technicians with extensive technical training over a range of inspection & Testing methods. All of our Engineers & technicians are qualified as a minimum to the international NDT/Inspection standards and guidelines required by the industry including ASNT, API, AWS, ASME, and BS-EN and our technical personnel are qualified under our written procedure and endeavor to offer the highest level of quality service.


One Stop Solution

A-Tech NDT provide all diversified services in Non-destructive Testing, Inspection and Integrity Engineering, the range of services covers various industries, sectors such as Power Plant, Oil/Gas, Storage Tank, Petrochemical, marine & Port, Steel manufacturing industries, Construction industries, water plant, Infrastructure, Pipe line industries etc.

Innovative

A-Tech NDT has the art to modernize the equipment, invest either on adopt the newly technology or develop own innovative solution based on challenges from customers, By far it has own designers, experts who works actively creating A-Tech NDT customized solutions with/without external supports.

Highly Experienced, Certified Experts

By far A-Tech NDT has qualified Engineers & technicians as Level 3, Level 2 certified in ASNT, PCN, CSWIP and ISO 9712.

Response & Flexibility

A-Tech NDT managements and staff’s aware timely response is one of the key factor customer satisfactions and therefore continuously investing & innovating the approach.

A-Tech NDT provides quality services

Conventional NDT Services Image

Conventional NDT services

Visual Inspection is a Basic NDT method to be used for each and every component before it is used for fabrication or installation or usage. It is the most common method of quality control, data acquisition, and data analysis. Visual Inspection, used in maintenance of facilities, mean inspection of equipment and structures using either or all of human senses such as vision with normal aids. Visual Inspection typically means inspection using raw human senses vision and/or any non-specialized inspection equipment. It constitutes an important aspect of practicable quality control for weldments with joints that require testing.

Read more...

Liquid Particle Testing or Dye Penetrant testing is a method that is used to reveal surface breaking flaws by bleed-out of a colored or fluorescent dye from the flaw. The technique is based on the ability of a liquid to be drawn into a "clean" surface breaking flaw by capillary action.

Read more...

Magnetic Particle Testing(MPI) is a non-destructive testing method used for defect detection. Magnetic flux leakage is the Basic Principle used in this technique. MPI is fast and relatively easy to apply. Surface preparation is not as critical as it is for some other NDT methods.

Read more...

Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations. Ultrasonic inspection can be used for flaw detection/evaluation, dimensional measurements, material characterization, and more.

Read more...

Ultrasonic thickness measurement (UTM) is a non-destructive measurement (gauging) of the local thickness of a solid element (typically made of metal, if using ultrasound testing for industrial purposes) basing on the time taken by the ultrasound wave to return to the surface.

Read more...

Radiographic Testing (RT)), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the highly penetrating electromagnetic waves such as X-rays or Gamma rays.

Read more...

Positive Material Identification (PMI) is the analysis of a metallic alloy to establish composition by reading the quantities or composition by percentage of its constituent elements. Typical methods for PMI include X-ray fluorescence (XRF) and optical emission spectrometry. PMI has the ability to eliminate human error. The Technique is simple and accurate.

Read more...

Ferrite Measurement is a non-destructive test method which assures the quality of the product without the need of expensive laboratory based destructive test methods.This is the major technique which is used to find the Proportion of ferrite content in the material. This is simple and very good for onsite measurement.

Read more...

Advanced NDT Services Image

Advanced NDT services

Phased Array Ultrasonic testing (PAUT) enables the generation and receiving of an ultrasonic beam where parameters such as angle, focal distance, and focal point size are controlled through software. The ultrasonic beam can be multiplexed over a large array. The wide range of capabilities Provides greater feasibility to the user in using PAUT.

Read more...

Time Of Flight Diffraction (TOFD)works with the Principle of diffraction in contrast to Reflection of ultrasound as used in conventional UT. The deflection of a wave front as it passes an ultrasonically opaque object and expands into the region that is behind the object and hence not directly exposed to the incoming waves. When ultrasound is incident at linear discontinuity such as a crack, diffraction takes place its extremities.

Read more...

Eddy Current Weld Inspection is a method for the inspection of metallic parts Particularly Conductive material. The probe (coil), excited with an alternating current, induces an eddy current in the part being inspected. Any discontinuities or material property variations that change the eddy current flow in the part are detected by the probe.

Read more...

A Major advanced technique similar to UTG but for a wide area thickness measurement instead of localised spot. Ultrasonic corrosion mapping is a key method in most non-invasive inspection strategies. In ultrasonic wall thickness mapping systems, a probe is linked to a equipment / computer so that thickness data for each predetermined measurement position can be recorded.

Read more...

Hardness is the measure of how resistant solid matter is to various kinds of permanent shape change when a force is applied. However, the term hardness may also refer to resistance to bending, scratching, abrasion or cutting.

Read more...

The Coating is a layer that is applied to the surface of material or equipment to enhance the surface properties such as appearance, adhesion, wetability, corrosion resistance, wear resistance, and scratch resistance. A-Tech NDT performs Coating/ Painting inspections with Inspectors certified to applicable international standards such as NACE, BGAS, etc.

Read more...

About A-Tech NDT

Independent Inspection Company
  • A-Tech NDT specializes in Conventional & advanced Non-destructive testing techniques including phased array, TOFD, Eddy current and long-range guides wave ultrasonic testing while also offering consultancy services with a high level of technical expertise.
  • At A-Tech NDT, we have a dedicated team with all our Engineers & technicians qualified as a minimum to international NDT/inspection standards and guidelines required by the industry including ASNT, API, AWS, ASME, BS.
  • At present we have supplied our services to a number of companies in Cambodia, with scope of work including Tank Floor inspection, Welding inspection and surface cracking detection on Up Stream Engineering Tools.
  • At A-Tech NDT, we have a dedicated team with all our Engineers & technicians qualified as a minimum to international NDT/inspection standards and guidelines required by the industry including ASNT, API, AWS, ASME, BS.

© 2024 A-Tech NDT. All Rights Reserved.